{"product_id":"car-rocker-cover-heat-wrinkle-paint-red","title":"Car Rocker Cover Heat wrinkle paint - RED","description":"\u003cp\u003eAerosol wrinkle paint is a fantastic way to get that classic, textured \"factory\" finish on valve covers or dashboards, but it requires a specific technique to get the texture even.\u003c\/p\u003e\n\u003cp\u003eHere is how to achieve a professional result:\u003c\/p\u003e\n\u003cp\u003e1. Preparation\u003c\/p\u003e\n\u003cp\u003eCleanliness: Thoroughly degrease the part with wax and grease remover. Even a fingerprint can disrupt the wrinkle pattern.\u003c\/p\u003e\n\u003cp\u003eSanding: Scuff the surface with 320–400 grit sandpaper to ensure mechanical adhesion.\u003c\/p\u003e\n\u003cp\u003eMasking: Mask off any bolt holes, gasket surfaces, or fins you plan to polish later.\u003c\/p\u003e\n\u003cp\u003e2. Application (The \"Heavy\" Method)\u003c\/p\u003e\n\u003cp\u003eUnlike standard paint where you want thin coats, wrinkle paint needs film build to work.\u003c\/p\u003e\n\u003cp\u003eCoat 1: Apply a medium coat in a vertical direction. Wait 5 minutes.\u003c\/p\u003e\n\u003cp\u003eCoat 2: Apply a medium coat in a horizontal direction. Wait 5 minutes.\u003c\/p\u003e\n\u003cp\u003eCoat 3: Apply a final medium coat diagonally.\u003c\/p\u003e\n\u003cp\u003eGoal: You want a thick, uniform layer of wet paint without causing runs.\u003c\/p\u003e\n\u003cp\u003e3. Curing the Texture\u003c\/p\u003e\n\u003cp\u003eThe \"wrinkle\" is a chemical reaction that happens as the paint dries.\u003c\/p\u003e\n\u003cp\u003eHeat is Key: If the ambient temperature is below 25°C, the paint may not wrinkle properly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlacing in direct sunlight we find is the best method for best texture.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Shortcut: Use a heat gun or hair dryer on a low setting, moving it constantly over the surface. You will see the texture begin to \"tighten\" and prune up before your eyes.\u003c\/p\u003e\n\u003cp\u003eWarning: Do not get too close with the heat gun, or you may bubble the paint.\u003c\/p\u003e\n\u003cp\u003e4. Drying Time\u003c\/p\u003e\n\u003cp\u003eTouch Dry: 2 to 4 hours.\u003c\/p\u003e\n\u003cp\u003eHard Cure: 24 to 48 hours.\u003c\/p\u003e\n\u003cp\u003ePro Tip: If you need to sand the tops of cooling fins to reveal the bare metal underneath, wait at least 24 hours. If the paint is still soft, it will peel or smear rather than chip away cleanly.\u003c\/p\u003e\n\u003cp\u003eNote: Always use this paint in a well-ventilated area. The solvents in wrinkle finishes are particularly strong and can be quite pungent during the curing process.\u003c\/p\u003e","brand":"BCS Auto Paints","offers":[{"title":"Default Title","offer_id":52084606566682,"sku":null,"price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/6028\/5210\/files\/rn-image_picker_lib_temp_102f1275-1075-4293-97af-9b06f9d8674e.jpg?v=1776246397","url":"https:\/\/bcsautopaints.com.au\/products\/car-rocker-cover-heat-wrinkle-paint-red","provider":"BCS Auto Paints","version":"1.0","type":"link"}