Here are the basic steps to touch up chips and scratches on your car:
1. Clean the surface of the area you wish to touch up with water and soap. Dry it off with a clean rag before proceeding further.
2. Use a fine-grit sandpaper to smooth out any rough or jagged edges around the scratch or chip. This helps the touch-up paint to adhere better.
3. Apply a small amount of touch-up paint to the end of a toothpick or a small brush and carefully dab the paint onto the affected area. Be sure to only apply a small amount of paint, as too much can cause the repair to be noticeable.
4. Allow the paint to dry completely based on the recommendations on the paint label. Depending on the type of paint used, this could take anywhere from several hours to a day or more.
5. Once the paint is dry, use a clear coat to protect the vehicle’s new paint and ensure a uniform look.
Overall, touching up chips and scratches on a vehicle can be an easy DIY project, although it is important to take your time and to be patient throughout the process. If you are unsure about the process, you may want to consider taking your vehicle to a professional auto body shop.